Currently my dsc/abs unit is away to ecutesting.com for repair. I have searched but cant find the exact procedure for refitting and bleeding, so looking for some guidance. This is how I think it will be done, if anyone can confirm or correct me I would appreciate it. mount dsc abs pump and refit all 6 brake lines. top off brake fluid to max. Use inpa to activae the pump, then bleed each corner starting from real left, rear right front left front right, by having someone open bleed screw, press pedal, close bleed crew, release from pedal, (8 times each corner with the last time pedal being pumped before opening bleed screw. Should that do it, and will the abs pump have been activated at the correct stage in the procedure ? thank you in advance for all help given.