Jumpstart Jetson TX2 Dev Kit w/ Pi 3 GPIOs by Shorting Jetson Power Pins

Discussion in 'Anything' started by j-automotus, Oct 12, 2017.

  1. j-automotus

    j-automotus Guest

    Hi there,

    I'm building a system that will be used remotely and one of the requirements is for our Pi 3 to be able to turn on our Nvidia Jetson TX2 dev kit in the event that it shuts down. We're currently shorting power pins on the Jetson and it works fine in exclusion on the jetson's end, but we are having a hard time getting any of the pins on our RPi 3 to switch a transistor we're using off, so that we can...

    Jumpstart Jetson TX2 Dev Kit w/ Pi 3 GPIOs by Shorting Jetson Power Pins
     

Share This Page

Forums Teetk

Teetk

Forums